This is an old revision of the document!
−Table of Contents
Disable notebook touchpad in GNU/Linx
Following this recipe you can disable or enable the touchpad of your GNU/Linux notebook using the command line. I used it to control the touchpad of my Teclast F6, where the Fn key to disable the touchpad does not work.
Install the xinput Debian package and run the following to list the X input devices:
xinput list
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ Logitech USB Receiver Consumer Control id=8 [slave pointer (2)]
⎜ ↳ Logitech USB Receiver id=15 [slave pointer (2)]
⎜ ↳ SYNA3602:00 0911:5288 Touchpad id=11 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Video Bus id=6 [slave keyboard (3)]
↳ Power Button id=7 [slave keyboard (3)]
↳ SHUNCCM2MP: SHUNCCM2MP id=10 [slave keyboard (3)]
↳ Intel HID events id=12 [slave keyboard (3)]
↳ Intel HID 5 button array id=13 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=14 [slave keyboard (3)]
↳ Logitech USB Receiver Consumer Control id=9 [slave keyboard (3)]
The ask more info about input the touchpad (ID #11 in the above example):
niccolo@ithaca:~$ xinput list-props 11
Device 'SYNA3602:00 0911:5288 Touchpad':
Device Enabled (154): 1
Coordinate Transformation Matrix (156): 1.000000, ...
Device Accel Profile (286): 1
...
The Device Enabled property has ID #154, we can disable it:
xinput set-prop 11 154 0
Replace the zero with 1 to re-enable it.
Mapping Fn+ESC on the Teclast F6
The ESC key on the Teclast F6 notebook has the blue label indicating the touchpadd toggle function, but it does not work in GNU/Linux.
Using the evtest tool we can see that the Fn+ESC keys produces three events, i.e. it is the same as pressing three keys together:
Event: time 1620808296.082667, -------------- SYN_REPORT ------------ Event: time 1620808298.469045, type 4 (EV_MSC), code 4 (MSC_SCAN), value 1d Event: time 1620808298.469045, type 1 (EV_KEY), code 29 (KEY_LEFTCTRL), value 1 Event: time 1620808298.469045, -------------- SYN_REPORT ------------ Event: time 1620808298.471997, type 4 (EV_MSC), code 4 (MSC_SCAN), value db Event: time 1620808298.471997, type 1 (EV_KEY), code 125 (KEY_LEFTMETA), value 1 Event: time 1620808298.471997, -------------- SYN_REPORT ------------ Event: time 1620808298.473572, type 4 (EV_MSC), code 4 (MSC_SCAN), value 76 Event: time 1620808298.473572, type 1 (EV_KEY), code 85 (KEY_ZENKAKUHANKAKU), value 1
The keys are Left Control, Left Meta and the key used to toggle from Hankaku (half-width) to Zenkaku (full-width) Japanese character spacing 