This is an old revision of the document!

GL-iNet MT-300N-V2

GL.iNet Firmware	2.264
Kernel	4.4.93
OpenWrt	LEDE Reboot 17.01-SNAPSHOT
LuCI	git-17.298.45605-07e7ff0-1
CPU	MediaTek MT7628AN ver:1 eco:2 - MIPS 24KEc V5.5
RAM	128 Mb
Total Flash Storage	16 Mb
Free Flash Storage	3.1 Mb

Change repository

The default repositories are set in file /etc/opkg/distfeeds.conf, they are GL-iNet customized of OpenWRT:

src/gz lede_core http://www.gl-inet.com/lede/ramips/2.264/packages/mt7628
src/gz lede_base http://www.gl-inet.com/lede/ramips/2.264/packages/base
src/gz lede_luci http://www.gl-inet.com/lede/ramips/2.264/packages/luci
src/gz lede_packages http://www.gl-inet.com/lede/ramips/2.264/packages/packages
src/gz lede_routing http://www.gl-inet.com/lede/ramips/2.264/packages/routing
src/gz lede_telephony http://www.gl-inet.com/lede/ramips/2.264/packages/telephony
src/gz lede_shadowsocks http://www.gl-inet.com/lede/ramips/2.264/packages/shadowsocks

As of September 2023 they are no longer in service, so we are unable to update or install new packages.