User Tools

Site Tools


doc:appunti:hardware:power_meter_pm300

Power Meter UPM PM300

Quick User Guide

MEASUREMENT

  • Press A(UP) key to select Voltage , Amp, Max AMP Watt, Max Watt and Overload Display
  • Press B(DOWN) key to select KWh, Total Cost and Price

SET PRICE

  • Press B(DOWN) key to select Price display Mode
  • Press D(PRICE SET) key to enter Price Setting Mode
  • Use A(UP) or B(DOWN) key to adjust price and press D(PRICE SET) key to confirm

SET OVERLOAD WARNING

  • Press A (UP) key to select Overload Display Mode
  • Press C (Overload Set) key to enter Overload Setting Mode
  • Press A(UP) or B(DOWN) key to select desired W or A
  • Press C (Overload Set) key to enter to Value Setting Mode
  • Use A(UP) or B(DOWN) to adjust to desired value of Over Load Watt or Amp and press C(OVERLOAD SET) key to confirm

CLEAR MAX LOAD

  • Press and hold A (UP) & C(OVERLOAD SET) key for 3 seconds to clear the Max Load readings and buzzer beep

CLEAR USAGE READING

  • Press and hold B (DOWN) & D(PRICE SET) key for 3 seconds to clear “usage time ” and “KWh” reading , buzzer beep
doc/appunti/hardware/power_meter_pm300.txt · Last modified: 2010/01/11 14:14 by niccolo