rigacci.org

User Tools

Site Tools

Trace:
tecnica:motori:honda_ntv650_wiring_diagram

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
tecnica:motori:honda_ntv650_wiring_diagram [2025/10/16 17:53] – [Harness wires gauge] niccolotecnica:motori:honda_ntv650_wiring_diagram [2025/10/17 08:19] (current) – [Harness wires gauge] niccolo
Line 19: Line 19:
 | Thin    |  1.70 mm |  20 |  0.16 mm |  0.40 mm² | 21 AWG 20/34  | | Thin    |  1.70 mm |  20 |  0.16 mm |  0.40 mm² | 21 AWG 20/34  |
 | Medium  |  1.85 mm |  30 |  0.16 mm |  0.60 mm² | 19 AWG 30/34  | | Medium  |  1.85 mm |  30 |  0.16 mm |  0.60 mm² | 19 AWG 30/34  |
-| Thick   |  2.65 mm |  36 |  0.25 mm |  1.77 mm² | 15 AWG 36/30  |+| Thick   |  2.65 mm |  37 |  0.25 mm |  1.82 mm² | 15 AWG 37/30  |
  
 The outer diameter refers to the overall cable, including the insulator. The AWG gauge is calculated measuring the diameter of the single strand and calculating the overall cross-sectional area; then the nearest value is looked into the [[wp>American_wire_gauge|AWG gauge table]]. The outer diameter refers to the overall cable, including the insulator. The AWG gauge is calculated measuring the diameter of the single strand and calculating the overall cross-sectional area; then the nearest value is looked into the [[wp>American_wire_gauge|AWG gauge table]].
tecnica/motori/honda_ntv650_wiring_diagram.txt · Last modified: by niccolo