doc:appunti:hardware:raspberrypi_nas_remote_control
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
| doc:appunti:hardware:raspberrypi_nas_remote_control [2021/04/24 19:28] – [Configuring the gamepad in Kodi] niccolo | doc:appunti:hardware:raspberrypi_nas_remote_control [2021/04/24 19:59] (current) – [Working kernel versions] niccolo | ||
|---|---|---|---|
| Line 38: | Line 38: | ||
| The gamepad goes to stand-by after some time of non-use. To wake it up it is necessary to press the **start** button; the red LED turns on and the gamepad is working. | The gamepad goes to stand-by after some time of non-use. To wake it up it is necessary to press the **start** button; the red LED turns on and the gamepad is working. | ||
| + | |||
| + | ===== Problem: non working left and right arrows ===== | ||
| + | |||
| + | Everything is working correctly with a **Raspberry Pi 3**, using RaspiOS based on **Debian 9.11 Stretch** and **Kodi 17.6**. There is instead a problem with a **Raspberry Pi 4**, using RaspiOS based on **Debian 10.8** and **Kodi 18.7**: the **Left** and **Right** arrow keys do not work. | ||
| + | |||
| + | Someone had the same problem using Retropie: **[[https:// | ||
| + | |||
| + | ==== Working kernel versions ==== | ||
| + | |||
| + | ^ System | ||
| + | | Raspberry Pi 3 | 4.19.66-v7+ | ||
| + | | Raspberry Pi 4 | 5.10.11-v7l+ | ||
| + | | PC amd64 Debian 10.8 | 4.9.189-3+deb9u2 | ||
| + | | PC amd64 Debian 10.8 | 4.19.67-2+deb10u2 | ||
| + | | PC amd64 Debian 10.8 | 4.19.98-1+deb10u1 | ||
| + | | PC amd64 Debian 10.8 | 4.19.160-2 | ||
| + | |||
| + | ===== Web References ===== | ||
| + | |||
| + | * **[[https:// | ||
| + | * **[[https:// | ||
doc/appunti/hardware/raspberrypi_nas_remote_control.1619285314.txt.gz · Last modified: by niccolo
