Differences

This shows you the differences between two versions of the page.

--- tecnica:motori:honda_ntv650_custom_smartphonegps_holder [2025/04/10 10:45] – created niccolo
+++ tecnica:motori:honda_ntv650_custom_smartphonegps_holder [2025/04/10 11:21] (current) – niccolo
@@ Line 9: / Line 9: @@
   * The **support arm** is made from an L-shaped profile, **20 x 20 mm**, **3 mm** thickness, **130 mm** lenght.
   * Two **cylindrical spacers** are placed under the base, the outer diameter is **16 mm**, the inner hole is for an M8 bolt, i.e. an **8.2 mm** hole. The front spacer is **20 mm** height, the rear one is **14 mm**.
-  * The **RAM-Mount** compatible **ball** is fixed with an M8 bolt and a sel-locking nut.
+  * The **RAM-Mount** compatible **ball** is fixed with an M8 bolt and a selt-locking nut.
   * Two **M8 bolts** are required to fix the holder to the top bridge. They are **60 mm length**, with the threaded part at least **22 mm**.
@@ Line 24: / Line 24: @@
 To attach the self-made holder to the top bridge of the Revere you need **two M8 bolts**, **60 mm** length, the threaded part must be at least **22 mm** in length. I chose the **flanged head** type.
-In these photos you can see the RAM-Mount ball mounted on the bracket and the GPS mount purchased on Aliexpress:
+In these photos you can see the RAM-Mount ball mounted on the bracket and the GPS mount purchased from Aliexpress:
 {{.:honda_ntv650:ntv-650-bracket-with-ram-mount-ball.jpg?320|NTV650 Revere: Smartphone/GPS bracket with RAM-Mount ball}}
 {{.:honda_ntv650:ntv-650-cell-phone-holder.jpg?320|NTV650 Revere: Smartphone/GPS holder RAM-Mount compatible}}