Differences

This shows you the differences between two versions of the page.

--- tecnica:motori:honda_ntv650_custom_parts [2025/04/03 09:31] – [Smartphone/GPS holder compatible with RAM Mount] niccolo
+++ tecnica:motori:honda_ntv650_custom_parts [2025/04/10 10:47] (current) – niccolo
@@ Line 1: / Line 1: @@
 ====== Honda NTV650 Revere - Custom parts ======
-===== Harness for 12 v power supply =====
+  * **[[honda_ntv650_custom_harness_12v_pwer_supply]]**
+  * **[[honda_ntv650_custom_smartphonegps_holder]]**
-I made the following harness to draw 12 v from the battery for my GPS or for recharging the smartphone. The connector is useful also to connect a battery charge mantainer during periods of long non-use.
-The **10 A fuse** (a regular ATO/ATC blade fuse) is mounted on two **faston connectors**. The output is a **180923-0 TE Connectivity** 2 way female unsealed faston connector. The fuse blades are 5.3 mm wide, but we neverthless used  two **6.3 mm** faston female connectors (The connector has been slightly squeezed to obtain a more solid connection). The 180923-0 connector accepts **6.3 mm** faston female connectors, with the locking lance.
-The eyelet terminals connect directly to the battery, the connector is reachable near the main beam of the motorcycle frame, on the left side.
-{{.:honda_ntv650:12v-supply-harness.jpg?400|}}
-^ Wires lenght  ^^
-^ Black      | 830 mm  |
-^ Red        | 690 mm  |
-^ Red short  | 140 mm  |
-===== Smartphone/GPS holder compatible with RAM Mount =====
-{{ .:honda_ntv650:gps-holder-openscad-rendering.png?direct&200|}}
-**[[https://rammount.com/|RAM Mounts]]** is famous for its system using the **rubber balls** as joins, the most effective is the **B size**, where the ball size is **1 inch diameter**.
-I built a **steel adapter** welding together two pieces of standard soft iron profiles. The holder fits the bolts of the steering handle. Here are the measures, a 3D model and the pictures of the final result. The actual phone/GPS holder is a RAM Mounts compatibile one, which integrates its B size ball and the **short double socket arm**.
-  * The **base plate** is made from a piece **74 x 20 mm**, **4 mm thickness**.
-  * The **support arm** is made from an L-shaped profile, **20 x 20 mm**, **130 mm lenght**, **3 mm thickness**.
-  * Two **cylindrical spacers** are placed under the base, the outer diameter is **16 mm**, the inner hole is for an M8 bolt, i.e. an **8.2 mm hole**. The front spacer is **20 mm** height, the rear one is **14 mm**.