rigacci.org

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== NTV 650 Revere: Harness for 12 v power supply ======

I made the following harness to draw 12 v from the battery for my GPS or for recharging the smartphone. The connector is useful also to connect a battery charge mantainer during periods of long non-use.

The **10 A fuse** (a regular ATO/ATC blade fuse) is mounted on two **faston connectors**. The output is a **180923-0 TE Connectivity** 2 way female unsealed faston connector. The fuse blades are 5.3 mm wide, but we neverthless used  two **6.3 mm** faston female connectors (The connector has been slightly squeezed to obtain a more solid connection). The 180923-0 connector accepts **6.3 mm** faston female connectors, with the locking lance.

The eyelet terminals connect directly to the battery, the connector is reachable near the main beam of the motorcycle frame, on the left side.

{{.:honda_ntv650:12v-supply-harness.jpg?480|}}

^ Wires lenght  ^^
^ Black      | 830 mm  |
^ Red        | 690 mm  |
^ Red short  | 140 mm  |

Once mounted the connector can be reached on the left side, under the tank:

{{.:honda_ntv650:ntv-650-power-outlet.jpg?480|}}