Differences

This shows you the differences between two versions of the page.

--- tecnica:motori:honda_3d_print_spare_parts [2024/11/29 18:16] – [3D-printng Honda motorcycle spare parts] niccolo
+++ tecnica:motori:honda_3d_print_spare_parts [2024/12/02 14:42] (current) – [16965MM5770 modified to fit a 5 mm pin] niccolo
@@ Line 53: / Line 53: @@
 ==== 16965MM5770 modified to fit a 5 mm pin ====
-This is a slightly modified project, designed to fit petcocks with a **5 mm long pin**. Generally these non original petcocks have the pin smaller: a square section of **7.60 x 7.60 mm** instead of 7.90 x 7.90 mm.
+This is a slightly modified project, designed to fit petcocks with a **5 mm long pin**. Here you will need a metal tube (**7.0 x 5.4 mm** diameter, **13.0 mm** long). Generally these non original petcocks have the pin smaller: a square section of **7.60 x 7.60 mm** instead of 7.90 x 7.90 mm.
 {{.:3dprint:16965mm5770-short-pin-2.png?direct&200|}}