Differences

This shows you the differences between two versions of the page.

--- tecnica:meccanica:vector_welding_mig_130 [2025/03/12 17:08] – [Web references] niccolo
+++ tecnica:meccanica:vector_welding_mig_130 [2026/04/12 08:00] (current) – [Welding samples] niccolo
@@ Line 644: / Line 644: @@
 ^ WFS  | Wire Feed Speed.  |
-===== Welding samples =====
+===== Welding samples: 1 mm thich pipe =====
 These are some welding tests on a steel pipe (12 mm outer diameter, 1.0 mm thick), carried out at different current and amperage values. The wire used is a Telwin flux-cored 0.8 mm.
@@ Line 659: / Line 659: @@
 {{.:vector_welding:sample:img_173227_0.8w-40A-13.5V-3-slow-move_lbl.jpg?direct&260|}}
 {{.:vector_welding:sample:img_173514_0.8w-40A-14.0V_lbl.jpg?direct&260|}}
+===== Welding samples: 4 mm thich bar =====
+Some (bad) tests on a steel bar, 4 mm thick, with a flux-cored 1.0 mm wire:
+{{.:vector_welding:welding-4mm-1.jpg?direct&400|}}
+{{.:vector_welding:welding-4mm-2.jpg?direct&400|}}
+^  ^ Ampere  ^ Volt  ^
+^ A  |  120 |  19.0 |
+^ B  |  110 |  19.0 |
+^ C  |  100 |  19.0 |
+^ D  |  100 |  18.0 |
+^ E  |  100 |  17.5 |
+^ F  |  100 |  17.0 |
+^ G  |  100 |  16.5 |
 ===== Web references =====