Differences

This shows you the differences between two versions of the page.

--- doc:appunti:prog:kivy_debian_12_android_11 [2023/10/09 07:27] – [Writing the buildozer.spec file] niccolo
+++ doc:appunti:prog:kivy_debian_12_android_11 [2024/11/21 09:55] (current) – [Prepare the Kivy project in user space] niccolo
@@ Line 78: / Line 78: @@
 ==== Using the new venv install method ====
-FIXME Instead of disabling the externally-managed-environment flag or instead of using the pip3 ''%%--user%%'' install method, it should be possible to use the venv pip3 install method. You need to install the **python3-venv** Debian package. This recipe did not work for me, but should be investigated further:
+:!: **WARNING**: Till now we did not use this new preferred method, because the package **python-for-android** uses the old ''pip install'' method. See below about the //[[#installation_in_user_space|user method]]// install.
+Instead of disabling the externally-managed-environment flag or instead of using the pip3 ''%%--user%%'' install method, it should be possible to use the venv pip3 install method. You need to install the **python3-venv** Debian package. This recipe did not work for me, but should be investigated further:
 <code bash>
@@ Line 121: / Line 123: @@
 ==== Prepare the Kivy project in user space ====
+:!: **INFO**: This procedure is **required only once** when we start a new projec.
 Now it is time to prepare the Kivy project directory for the build of the Android package. You must check the following:
@@ Line 181: / Line 185: @@
 You can use **presplash.filename** and **icon.filename** to include two artwork in your app. The //presplash// will be displayed at startup, during the initialization of the environment (unfortunately it is rather time consuming). The //icon// is instead what you can imagine. Use PNG graphics at least 512 x 512 pixels, you can use transparency too.
-In **android.permissions** you must list all the permissions that your app will require from the operating system. If you forget to declare something your app simply will not be able to do that operation. Beware that starting from Android 10 the access to the external storae (basically the space into the SD card or into the device memory) has undergone a drastic change, see the table below for a basic overview.
+In **android.permissions** you must list all the permissions that your app will require from the operating system. If you forget to declare something your app simply will not be able to do that operation. Beware that starting from Android 10 the access to the external storage (basically the space into the SD card or into the device memory) has undergone a drastic change, see the table below for a basic overview.
 ^ READ_EXTERNAL_STORAGE   | This was the long-established permission required by the apps to read the [[https://android.googlesource.com/platform/docs/source.android.com/+/android-4.2.1_r1.1/src/tech/storage/index.md|external storage]] (a permissionless filesystem residing into the SD card or into a dedicated partition of the device internal storage). If you want e.g. to read the pictures from the DCIM folder of an **Android 8** device, you must grant this permission. This is not longer true starting from **Android 10** (API level 29) which introduced the **scoped storage**, designed to protect app and user data and reduce file clutter; requesting ''READ_EXTERNAL_STORAGE'' in Android 10 actually means requesting access only to **photos and media**. Afterwards **Android 11** (API level 30) fixed several problems with that implementation; in Android 11 and above requesting ''READ_EXTERNAL_STORAGE'' does not give you any actual permission. Generally, in Android 11, an app cannot access the root directory of the SD card and the Download directory, it can access only its ASD (App Specific Directory).  |
@@ Line 209: / Line 213: @@
 The **compile SDK** is the environment you want to use to create the app, i.e. the SDK you downloaded from Google (which generally support the higher API available at the moment). This will affects what functions and constructs you can use in your program. If you do not specify a version, Buildozer should detect the highest SDK downloaded and use it. In our case only one SDK was downloaded, and it was SDK API 31.
-==== Compiling the package ====
+==== Compiling the package (debug or release) ====
+:!: **INFO**: This is **the only procedure** to be executed whenever you want to compile a new version; the **version number** must be updated into the **main.py** source code.
+Enter the project directory and edit the **main.py** source code updating the definition of the **%%__version__%%** variable (the **buildozer.spec** will refer this value to create the package name). Then choose to make a debug build:
 <code>
-# Choose debug or release build:
 buildozer android debug
-#buildozer android release
 </code>
+The package will be created into the **bin/** subdirectory, using a name like **packagename-version-arm64-v8a_armeabi-v7a-debug.apk**.
+When you are ready to **publish** your package, you must create the //release// binary:
+<code>
+buildozer android release
+</code>
+In this case the package created into the **bin/** subdirectory will be named like **packagename-version-arm64-v8a_armeabi-v7a-release.aab**, which is not directly installable into the device.
 ===== Web Resources =====
@@ Line 237: / Line 254: @@
   * **[[https://community.appinventor.mit.edu/t/how-to-access-non-media-media-files-on-android-11/54828|How to access non-media & media files on Android 11+]]**
   * **[[https://community.appinventor.mit.edu/t/asd-app-specific-directory-vs-private-folder/19154|ASD (app specific directory) vs Private folder]]**
+  * **[[https://developer.android.com/training/data-storage/shared/media|Access media files from shared storage]]**