doc:appunti:hardware:ups_apc
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
doc:appunti:hardware:ups_apc [2022/10/27 17:37] – [Using APC UPS on Debian GNU/Linux] niccolo | doc:appunti:hardware:ups_apc [2022/11/02 16:49] (current) – [APC Back-UPS CS 500] niccolo | ||
---|---|---|---|
Line 225: | Line 225: | ||
</ | </ | ||
- | The two most important functions are the **#10 battery calibration** and the **#12 self-test interval**. Battery calibration must be initiated with a fully charged battery and the normal load (it should be above 10%); it will end when battery drops below about 25%. Unfortunately it seems that the **Back-UPS CS 500** model does not support the **periodic self-test**, chosing option #12 results always in self-test interval: **None**. | + | The two most important functions are the **#10 battery calibration** and the **#12 self-test interval**. Battery calibration must be initiated with a fully charged battery and the normal load (it should be above 10%); it will end when battery drops below about 25%. |
+ | |||
+ | Unfortunately it seems that the **Back-UPS CS 500** model does not support | ||
^ New battery date (MM/ | ^ New battery date (MM/ |
doc/appunti/hardware/ups_apc.txt · Last modified: 2022/11/02 16:49 by niccolo