Differences

This shows you the differences between two versions of the page.

--- doc:appunti:hardware:sjcam-8pro [2022/05/05 06:21] – [Custom Firmwares] niccolo
+++ doc:appunti:hardware:sjcam-8pro [2023/06/09 10:21] (current) – [SJCAM SJ8 Pro Review] niccolo
@@ Line 7: / Line 7: @@
 Unfortunately SJCAM does not support this camera very much: the latest **firmware upgrade** is from September 2020, despite there are some evident bugs and several aspects of the user interface which should be improved. Thirdy part support is poor: there is no **waterproof case** except the original one, which unfortunately has a plastic window. There is not much documentation about **customizing the firmware** or scripting using the **Ambarella Scripting**.
-See also my other page about this camera: **[[sjcam-8pro-ambarella-firmware-modding]]**, **[[sjcam-8pro-ambarella-wifi-api]]** and **[[sjcam-8pro-custom-firmware]]**.
+See also my other page about this camera:
+  * **[[sjcam-8pro-ambarella-firmware-modding]]**
+  * **[[sjcam-8pro-ambarella-wifi-api]]**
+  * **[[sjcam-8pro-custom-firmware]]**
+===== Specs, Pros and Cons =====
 **Pros**
@@ Line 120: / Line 126: @@
 ===== Color profiles =====
-The SJCAM SJ8 Pro has two **color profiles** selectable from the **Current Mode Settings** menu: **SJCAM - Vivid** and **Flat**. There is a firmware bug that prevent you changing the color profile if the Gyro Stabilizer is enabled, and the color profile choiche is not remebered after power off. In my opinion the vivid profile is too much saturated, specially it **enhances too much** the contrast from the **blue sky** and the **white clouds**, even when the sky is mainly gray and cloudy (as in the frames below). On the contrary the flat profile is **too much washed out** that you will hardly want to use it.
+The SJCAM SJ8 Pro has two **color profiles** selectable from the **Current Mode Settings** menu: **SJCAM - Vivid** and **Flat**. At bootstrap the camera select another profile, let's call it **Default**, which is identical to SJCAM -Vivid, but it is stored in a different place into the firmware, so it can be customized separately.
+There is a firmware bug that prevent you changing the color profile if the Gyro Stabilizer is enabled, and the color profile choiche is not remebered after power off. In my opinion the vivid profile is too much saturated, specially it **enhances too much** the contrast from the **blue sky** and the **white clouds**, even when the sky is mainly gray and cloudy (as in the frames below). On the contrary the flat profile is **too much washed out** that you will hardly want to use it.
 {{.:sjcam:color-profile-sjcam-vivid.jpg?direct&400|Color Profile SJCAM - Vivid}}
 {{.:sjcam:color-profile-flat.jpg?direct&400|Color Profile Flat}}
-You can edit the color profiles using the BitrateEditor software. But be careful that the profile selected at bootstrap is neither //SJCAM - Vivid// nor //Flat//, but another one stored in some other part of the firmware that I was unable to locate.
+You can edit the three color profiles //SJCAM - Vivid//, //Flat// and //Default// using BitrateEditor (required version 10.7 - Nov 3, 2021).
 ==== Flat vs SJCAM - Vivid ====
@@ Line 643: / Line 651: @@
 ===== The TCP API =====
-See the page **[[sjcam-8pro-api]]** about the programming interface (API) offered by the SJCAM SJ8 Pro over the WiFi connection or even in localhost. The interface is offered on port **TCP/7878**.
+See the page **[[sjcam-8pro-ambarella-wifi-api]]** about the programming interface (API) offered by the SJCAM SJ8 Pro over the WiFi connection or even in localhost. The interface is offered on port **TCP/7878**.
 The interface is based on **JSON messages**: you can exchange them over the WiFi connection as the official app **[[https://play.google.com/store/apps/details?id=org.jght.sjcam.zone|SJCAM Zone]]** does between the Android device and the camera. You can also **connect a PC** to the camera via WiFi and use any programming language supporting TCP sockets.
 You can also send messages from the camera itself: the **RTOS** operating system provides the **telnet** command which can ben used to talk to the **GNU/Linux** operating system running on the same camera, which handles the API requests (the camera actually runs two operating system simultaneusly: RTOS and Linux). In this scenario I was able to talk to the API but with no interaction: I used ''telnet'' to only send messages but I did not find any way to read the answers.
+===== Connecting to GNU/Linux via USB =====
+If you connect the SJ8 Pro camera to a GNU/Linux computer using an USB cable, the Linux kernel will detect it, this is the **lsusb** output:
+<code>
+Bus 001 Device 006: ID 070a:4026 Oki Electric Industry Co., Ltd A9 Platform
+</code>
+The kernel inform also that the device is available as **USB Mass Storage**:
+<code>
+usb 1-1.1: new high-speed USB device number 6 using ehci-pci
+usb 1-1.1: New USB device found, idVendor=070a, idProduct=4026, bcdDevice= 0.01
+usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
+usb 1-1.1: Product: A9 Platform
+usb 1-1.1: Manufacturer: AmbarellaInc
+usb 1-1.1: SerialNumber: 0001
+usb-storage 1-1.1:1.0: USB Mass Storage device detected
+scsi host6: usb-storage 1-1.1:1.0
+scsi 6:0:0:0: Direct-Access     SJCAM    SJ8PRO           1000 PQ: 0 ANSI: 0
+sd 6:0:0:0: Attached scsi generic sg3 type 0
+</code>
 ===== Tips =====