Differences

This shows you the differences between two versions of the page.

--- doc:appunti:hardware:sjcam-8pro [2022/05/06 16:11] – [SJCAM SJ8 Pro Review] niccolo
+++ doc:appunti:hardware:sjcam-8pro [2022/06/14 08:59] – [Color profiles] niccolo
@@ Line 127: / Line 127: @@
 {{.:sjcam:color-profile-flat.jpg?direct&400|Color Profile Flat}}
-You can edit the color profiles using the BitrateEditor software. But be careful that the profile selected at bootstrap is neither //SJCAM - Vivid// nor //Flat//, but another one stored in some other part of the firmware that I was unable to locate.
+You can edit the color profiles using the BitrateEditor software. Be careful that the profile selected at bootstrap is neither //SJCAM - Vivid// nor //Flat//, but the one named //Default// by BitrateEditor (starting from version 10.7 - Nov 3, 2021).
 ==== Flat vs SJCAM - Vivid ====
@@ Line 645: / Line 645: @@
 ===== The TCP API =====
-See the page **[[sjcam-8pro-api]]** about the programming interface (API) offered by the SJCAM SJ8 Pro over the WiFi connection or even in localhost. The interface is offered on port **TCP/7878**.
+See the page **[[sjcam-8pro-ambarella-wifi-api]]** about the programming interface (API) offered by the SJCAM SJ8 Pro over the WiFi connection or even in localhost. The interface is offered on port **TCP/7878**.
 The interface is based on **JSON messages**: you can exchange them over the WiFi connection as the official app **[[https://play.google.com/store/apps/details?id=org.jght.sjcam.zone|SJCAM Zone]]** does between the Android device and the camera. You can also **connect a PC** to the camera via WiFi and use any programming language supporting TCP sockets.