Differences

This shows you the differences between two versions of the page.

--- doc:appunti:hardware:raspberrypi_nas_remote_control [2021/04/24 17:11] – niccolo
+++ doc:appunti:hardware:raspberrypi_nas_remote_control [2021/04/24 17:50] – [Web References] niccolo
@@ Line 37: / Line 37: @@
 Custom configuration is saved into the directory **$HOME/.kodi/userdata/peripheral_data/**, in our case the file was named **addon_YSTEK_MICREAL_USB_Gamepad.xml**.
-Il gamepad va in modalità stand-by dopo poco tempo di non utilizzo, per risvegliarlo è necessario premere il pulsante start. Il LED rosso si accende e i tasti funzionano nuovamente.
+The gamepad goes to stand-by after some time of non-use. To wake it up it is necessary to press the **start** button; the red LED turns on and the gamepad is working.
+==== Working kernel versions ====
+^ System                ^ Kernel             ^  ABS_X Working  ^
+| Raspberry Pi 3        | 4.19.66-v7+        | Yes  |
+| Raspberry Pi 4        | 5.10.11-v7l+       | No   |
+| PC amd64 Debian 10.8  | 4.9.189-3+deb9u2   | Yes  |
+| PC amd64 Debian 10.8  | 4.19.67-2+deb10u2  | Yes  |
+| PC amd64 Debian 10.8  | 4.19.98-1+deb10u1  | No   |
+| PC amd64 Debian 10.8  | 4.19.160-2         | No   |
+===== Web References =====
+  * **[[https://www.retropie-italia.it/viewtopic.php?f=19&t=702|[GUIDA] DragonRise Inc. Generic USB Joystick]]**
+  * **[[https://retropie.org.uk/forum/topic/25657/controler-issue-no-left-and-right-not-working-at-all/|Controler Issue (no left and right not working at all)]]**