doc:appunti:hardware:raspberrypi_nas_audio
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revision | |||
doc:appunti:hardware:raspberrypi_nas_audio [2021/03/18 10:44] – niccolo | doc:appunti:hardware:raspberrypi_nas_audio [2021/03/22 09:27] (current) – [Raspberry Pi NAS: The audio subsystem] niccolo | ||
---|---|---|---|
Line 1: | Line 1: | ||
====== Raspberry Pi NAS: The audio subsystem ====== | ====== Raspberry Pi NAS: The audio subsystem ====== | ||
+ | |||
+ | This page is about configuring the **audio subsystem** on a Raspberry Pi installed with RaspiOS, to be used as NAS and mediacenter. See the main index at **[[raspberrypi_nas]]**. | ||
I want to use **Kodi** for **HDMI video and audio** playback, but I want also occasionally to play music using **Music Player Daemon**, routing the audio to an external amplifier which has **RCA stereo connectors**. Once the cables are connected, it is also desiderable to play Kodi videos routing video to **HDMI monitor** and routing audio to the **stereo amplifier**. | I want to use **Kodi** for **HDMI video and audio** playback, but I want also occasionally to play music using **Music Player Daemon**, routing the audio to an external amplifier which has **RCA stereo connectors**. Once the cables are connected, it is also desiderable to play Kodi videos routing video to **HDMI monitor** and routing audio to the **stereo amplifier**. |
doc/appunti/hardware/raspberrypi_nas_audio.1616064245.txt.gz · Last modified: 2021/03/18 10:44 by niccolo