rigacci.org

User Tools

Site Tools

Trace:
doc:appunti:hardware:raspberrypi_nas_audio

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Last revisionBoth sides next revision
doc:appunti:hardware:raspberrypi_nas_audio [2021/03/11 09:53] – [Music Player Daemon] niccolodoc:appunti:hardware:raspberrypi_nas_audio [2021/03/18 10:44] – niccolo
Line 30: Line 30:
 ==== Using an externa USB sound card ==== ==== Using an externa USB sound card ====
  
 +{{ .:raspberrypi:raspberry-pi-usb-audio-cable.jpg?180|USB sound card with RCA connectors and cable}}
 For a decent audio quality, I decided that  the only acceptable solution is to relay on an external USB sound card connected to my stereo amplifier. I choosed a model based on the **C-Media Electronics** chip (USB Id **0d8c:0024**), which comes with two standard RCA connectors. The device is compatible with ALSA so the Pulseaudio system can select it per default, setting the following in **/etc/pulse/client.conf**: For a decent audio quality, I decided that  the only acceptable solution is to relay on an external USB sound card connected to my stereo amplifier. I choosed a model based on the **C-Media Electronics** chip (USB Id **0d8c:0024**), which comes with two standard RCA connectors. The device is compatible with ALSA so the Pulseaudio system can select it per default, setting the following in **/etc/pulse/client.conf**:
  
doc/appunti/hardware/raspberrypi_nas_audio.txt · Last modified: 2021/03/22 09:27 by niccolo