rigacci.org

User Tools

Site Tools

Trace:
doc:appunti:hardware:raspberrypi_nas_audio

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
Next revisionBoth sides next revision
doc:appunti:hardware:raspberrypi_nas_audio [2021/03/10 15:38] – [Audio hardware: Raspberry Pi 4] niccolodoc:appunti:hardware:raspberrypi_nas_audio [2021/03/11 09:53] – [Music Player Daemon] niccolo
Line 7: Line 7:
 For the **hardware** part, you can use the **digital HDMI audio** or the **analog 3.5 mm jack** (which carries video and stereo audio signals over a CTIA 4 poles connector). For a **better audio quality** you have to connect and **audio hat** or an external **USB audio sound card**; as explained below the integrated audio devices are of unacceptable quality also for an occasional user, let alone an audiophile one! For the **hardware** part, you can use the **digital HDMI audio** or the **analog 3.5 mm jack** (which carries video and stereo audio signals over a CTIA 4 poles connector). For a **better audio quality** you have to connect and **audio hat** or an external **USB audio sound card**; as explained below the integrated audio devices are of unacceptable quality also for an occasional user, let alone an audiophile one!
  
-===== Raspberry Pi 4 audio hardware =====+===== Pi 4 audio hardware ===== 
 + 
 +There are several possibilities of getting audio from a Raspberry Pi 4. 
  
 ==== Digital audio through HDMI ==== ==== Digital audio through HDMI ====
Line 161: Line 164:
   * **[[https://superuser.com/questions/1274901/systemd-forking-vs-simple/|systemd forking vs simple?]]**   * **[[https://superuser.com/questions/1274901/systemd-forking-vs-simple/|systemd forking vs simple?]]**
  
-==== Use PulseAudio with Kodi ====+===== Use PulseAudio with Kodi =====
  
 With the PulseAudio running as a system service, you can start Kodi and go to **Settings** => **System** => **Audio** = **Audio output device** and select **PULSE: Default**. Here you can also switch between HDMI and stereo jack: With the PulseAudio running as a system service, you can start Kodi and go to **Settings** => **System** => **Audio** = **Audio output device** and select **PULSE: Default**. Here you can also switch between HDMI and stereo jack:
Line 188: Line 191:
 The **mpd** user must be addedd to the relevant groups: **audio**, **pulse** and **pulse-access**.  The **mpd** user must be addedd to the relevant groups: **audio**, **pulse** and **pulse-access**. 
  
 +===== Web References =====
 +
 +  * **[[https://kodi.wiki/view/PulseAudio|Kodi with PulseAudio]]**
 +  * **[[https://gist.github.com/bheisig/bf1a13a05cdb6a12ee805b00dc6d90bb|PulseAudio for Kodi, MPD and remote access on a Ubuntu host]]**
  
doc/appunti/hardware/raspberrypi_nas_audio.txt · Last modified: 2021/03/22 09:27 by niccolo