Differences

This shows you the differences between two versions of the page.

--- doc:appunti:hardware:raspberrypi_nas_audio [2021/03/10 15:37] – created niccolo
+++ doc:appunti:hardware:raspberrypi_nas_audio [2021/03/11 09:53] – [Music Player Daemon] niccolo
@@ Line 7: / Line 7: @@
 For the **hardware** part, you can use the **digital HDMI audio** or the **analog 3.5 mm jack** (which carries video and stereo audio signals over a CTIA 4 poles connector). For a **better audio quality** you have to connect and **audio hat** or an external **USB audio sound card**; as explained below the integrated audio devices are of unacceptable quality also for an occasional user, let alone an audiophile one!
-===== Audio hardware: Raspberry Pi 4 =====
+===== Pi 4 audio hardware =====
+There are several possibilities of getting audio from a Raspberry Pi 4.
 ==== Digital audio through HDMI ====
@@ Line 161: / Line 164: @@
   * **[[https://superuser.com/questions/1274901/systemd-forking-vs-simple/|systemd forking vs simple?]]**
-==== Use PulseAudio with Kodi ====
+===== Use PulseAudio with Kodi =====
 With the PulseAudio running as a system service, you can start Kodi and go to **Settings** => **System** => **Audio** = **Audio output device** and select **PULSE: Default**. Here you can also switch between HDMI and stereo jack:
@@ Line 188: / Line 191: @@
 The **mpd** user must be addedd to the relevant groups: **audio**, **pulse** and **pulse-access**.
+===== Web References =====
+  * **[[https://kodi.wiki/view/PulseAudio|Kodi with PulseAudio]]**
+  * **[[https://gist.github.com/bheisig/bf1a13a05cdb6a12ee805b00dc6d90bb|PulseAudio for Kodi, MPD and remote access on a Ubuntu host]]**