rigacci.org

User Tools

Site Tools

Trace:
doc:appunti:hardware:olympus-e-m10:raw_processing

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Last revisionBoth sides next revision
doc:appunti:hardware:olympus-e-m10:raw_processing [2023/01/27 09:54] – [How To] niccolodoc:appunti:hardware:olympus-e-m10:raw_processing [2023/01/27 09:57] – niccolo
Line 52: Line 52:
 {{ olympus-raw-control.jpg?160|}} {{ olympus-raw-control.jpg?160|}}
 RAW development performed by OM Workspace is called **PC RAW processing** because it is performed by the PC. With some Olympus cameras it is possibile to perform the so called **USB RAW processing**, i.e. the processing is performed by the camera graphic processor (generally the Olympus TruePic) via the USB cable. The camera must be turned on and switched to the **RAW/Control** mode (see the picture of the USB menu on the right). Unfortunately the E-M10 is not capable of such mode. RAW development performed by OM Workspace is called **PC RAW processing** because it is performed by the PC. With some Olympus cameras it is possibile to perform the so called **USB RAW processing**, i.e. the processing is performed by the camera graphic processor (generally the Olympus TruePic) via the USB cable. The camera must be turned on and switched to the **RAW/Control** mode (see the picture of the USB menu on the right). Unfortunately the E-M10 is not capable of such mode.
- 
-===== Darktable ===== 
- 
-FIXME 
  
 ===== RawTherapee ===== ===== RawTherapee =====
Line 83: Line 79:
 {{.:rawtherapee:develop-default-in-camera.jpg?240|In-camera JPEG}} {{.:rawtherapee:develop-default-in-camera.jpg?240|In-camera JPEG}}
  
 +===== Darktable =====
 +
 +FIXME
  
 ===== dcraw ===== ===== dcraw =====
doc/appunti/hardware/olympus-e-m10/raw_processing.txt · Last modified: 2023/01/27 10:00 by niccolo