Differences

This shows you the differences between two versions of the page.

--- doc:appunti:hardware:lacie_d2_network_2 [2014/01/28 10:20] – [Wake-On-LAN] niccolo
+++ doc:appunti:hardware:lacie_d2_network_2 [2014/01/28 10:22] (current) – [Hacking the LaCie d2 Network 2] niccolo
@@ Line 3: / Line 3: @@
 {{.:lacie:lacie_d2_network.jpg?160  |LaCie d2 Network}}
-The **LaCie d2 Network 2** is very similar to the **[[lacie_d2_network|LaCie d2 Network]]**, luckily enough the hardware is better and gives better performances. Just one thing is worst than before: the Wake-On-LAN is not longer handled by the U-Boot code, it is handled by the init scripts. This means that if you install a plain GNU/Linux system, you must install special software to get the Wake-On-LAN function (if it is possible at all).
+The **LaCie d2 Network 2** is very similar to the **[[lacie_d2_network|LaCie d2 Network]]**, luckily enough the hardware is better and gives better performances. Just one thing is worst than before: the Wake-On-LAN is not longer handled by the U-Boot code, it is handled by the init scripts. This means that if you install a plain GNU/Linux system, you must install special software to get the Wake-On-LAN function.
 The LaCie software is changed a lot. May be it is possible get root access without disassembling it, have a look at the [[#the_auto-update_function|Auto-Update function]].