Differences

This shows you the differences between two versions of the page.

--- doc:appunti:hardware:gopro-hero-10 [2024/12/04 15:08] – created niccolo
+++ doc:appunti:hardware:gopro-hero-10 [2024/12/04 15:39] (current) – [Common operations] niccolo
@@ Line 1: / Line 1: @@
 ====== GoPro Hero 10 Black ======
+===== Common operations =====
+=== Dashboard (p.98) and Preferences (p.100) ===
+  * Rear touch screen => Swipe down => Dashboard
+  * Dashboard => Swipe left => Preferences
+=== Format SD Card ===
+  * Preferences => Reset => Format SD Card
+=== Camera Beeps ===
+  * Dashboard => Camera Beeps icon => Enable/disable
+  * Preferences => General => Beep Volume
+=== Screen Orientation ===
+  * Dashboard => Orientation Lock icon => Locked/All
+=== Front Screen (p.16) ===
+  * Dashboard => Front Screen Settings icon => Full Screen/Actual Screen/Status Only/Screen Off
+=== Shortcuts in capture screen ===
+  * Tap Capture settings => Pencil icon => Shortcuts
+=== QuickCapture ===
+If QuickCapture is enabled: with the camera off, press the shutter button; the camera turns on and starts recording immediately (lag 3 seconds). Pressing the shutter button again stops recording and the camera turns off.
+  * Dashboard => QuickCapture icon => Enable/disable
+===== Lens =====
+^ SuperView                  |     16 mm |
+^ Wide                       |  16-34 mm |
+^ Linear                     |  19-39 mm |
+^ Linear + Horizon Leveling  |  19-34 mm |
+^ Narrow                     |     27 mm |
 ===== Horizon leveling =====
+**{{.:gopro-hero-10:hero10-black-horizon-leveling.pdf|Horizon leveling max angles and FOV}}**
+===== Web References =====
+  * **[[https://community.gopro.com/s/article/HERO10-Black-In-Camera-Horizon-Leveling?language=en_US|HERO10 Black: In-Camera Horizon Leveling]]**