rigacci.org

User Tools

Site Tools

Trace:
doc:appunti:hardware:blackview_bv5300

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
doc:appunti:hardware:blackview_bv5300 [2023/08/30 10:54] – niccolodoc:appunti:hardware:blackview_bv5300 [2024/02/27 10:57] (current) – [Getting the scatter file] niccolo
Line 1: Line 1:
 ====== Blackview BV5300 Android Phone (rooting) ====== ====== Blackview BV5300 Android Phone (rooting) ======
 +
 +I purchased this phone from Amazon in August 2023 for about **113 €**, to use as [[..:android:osmand_on_motorbike|GPS satellite navigation system on the motorbike]].
 +
 +{{.:bv5300:bv5300-back.jpg?direct&600|The Blackview BV5300}}
  
 ^ Model            | Blackview BV5300  | ^ Model            | Blackview BV5300  |
 +^ Size             | 161.5 x 77.6 x 15 mm, weight 280 g  |
 ^ RAM              | 4.0 Gb   | ^ RAM              | 4.0 Gb   |
 ^ CPU              | MediaTek Helio A22 (MT6761) - ARM Cortex-A53 2.0 GHz, 4 core  | ^ CPU              | MediaTek Helio A22 (MT6761) - ARM Cortex-A53 2.0 GHz, 4 core  |
 ^ GPU              | PowerVR GE8300  | ^ GPU              | PowerVR GE8300  |
 ^ Internal Memory  | 32 Gb    | ^ Internal Memory  | 32 Gb    |
-^ Screen           | 6.1 inches, 720 x 1560, brightness ??? nit typical  |+^ Screen           | 6.1 inches, 720 x 1560, brightness 500 cd/m² typical  |
 ^ Battery          | Non replaceable 6580 mA  | ^ Battery          | Non replaceable 6580 mA  |
 ^ Connector        | USB C    | ^ Connector        | USB C    |
 ^ Android version  | 12       | ^ Android version  | 12       |
-^ A/B (Seamless) System Updates  | No  |+^ A/B (Seamless) System Updates  | No\\ No //boot_a// or //boot_b// partitions\\ ''fastboot getvar current-slot'' returned //GetVar Variable Not found//  | 
 +^ Anti-Rollback Protection  | No\\ ''fastboot getvar anti'' returned //GetVar Variable Not found//  | 
 + 
 +{{.:bv5300:bv5300-front.jpg?direct&200|BV5300: Front view}} 
 +{{.:bv5300:bv5300-bottom.jpg?direct&200|BV5300: Bottom}} 
 +{{.:bv5300:bv5300-right.jpg?direct&200|BV5300: Rigth buttons}} 
 +{{.:bv5300:bv5300-left.jpg?direct&200|BV5300: Left button}}
  
 ===== Getting the scatter file ===== ===== Getting the scatter file =====
Line 28: Line 39:
  
   * Using **SP_Flash_Tool_v5.2228_Linux**:   * Using **SP_Flash_Tool_v5.2228_Linux**:
-    * Run **flash_tool.sh** and click on **Readback**.+    * Run **flash_tool.sh**  
 +    * In the **Download** tab, **Scatter-loading File**: choose any scatter file you have on your hard disk (this step is required to unlock the Readback function below). 
 +    * Click on the **Readback** tab and delete all the partitions defined by the scatter file you loaded.
     * Add **two regions** to be read-back:     * Add **two regions** to be read-back:
       * Filename: **preloader.bin**       * Filename: **preloader.bin**
doc/appunti/hardware/blackview_bv5300.1693392871.txt.gz · Last modified: 2023/08/30 10:54 by niccolo