doc:appunti:hardware:alicegate_agpwi_wifi_n
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision | ||
doc:appunti:hardware:alicegate_agpwi_wifi_n [2018/02/05 10:25] – [Flashing the Alternative Firmware] niccolo | doc:appunti:hardware:alicegate_agpwi_wifi_n [2018/02/05 10:59] – niccolo | ||
---|---|---|---|
Line 6: | Line 6: | ||
It has two external WiFi antennas, we succeeded in flashing a new firmware on it. Beware that someone reported that models with **internal antennas** accept only **firmwares signed** by the manufacturer. | It has two external WiFi antennas, we succeeded in flashing a new firmware on it. Beware that someone reported that models with **internal antennas** accept only **firmwares signed** by the manufacturer. | ||
- | ===== The Alternative Firmware ===== | + | |
+ | ===== Alternative Firmware | ||
+ | |||
+ | FIXME\\ **WARNING**: | ||
+ | |||
+ | {{.: | ||
+ | {{.: | ||
We will use a firmware released by **[[wp> | We will use a firmware released by **[[wp> | ||
Line 19: | Line 25: | ||
* **WDS repeater** is not working. | * **WDS repeater** is not working. | ||
* **Static DHCP** lease does not work: settings are not retained. | * **Static DHCP** lease does not work: settings are not retained. | ||
+ | |||
+ | ==== Flashing the TEO Firmware ==== | ||
The files you have to download are: | The files you have to download are: | ||
Line 24: | Line 32: | ||
* **{{.: | * **{{.: | ||
* **{{.: | * **{{.: | ||
- | |||
- | There are other alternative firmwares to upload on this hardware. See for example this page: **[[http:// | ||
- | ===== Flashing TEO Alternative Firmware ===== | ||
==== Short-Circuit Serial TX/RX to Enable the Special Upgrade Page ==== | ==== Short-Circuit Serial TX/RX to Enable the Special Upgrade Page ==== | ||
Line 94: | Line 99: | ||
* In two minutes **the router reboots** and it is ready. | * In two minutes **the router reboots** and it is ready. | ||
- | ===== Firmware | + | ===== Alternative |
- | {{.: | + | {{.: |
- | {{.: | + | |
- | ===== Firmware | + | There is another alternative firmware to upload on this hardware. See this page: **[[http:// |
+ | |||
+ | * **AR-5382u-CFE-A731-406TDE-C01_R01_0623.bin** (md5: 6ac7235c50c58a68f74e5ad52ecaa4ce) | ||
+ | * **AR-5382u-A731-406CTL-T01_R08.bin** (md5: 793593abd73060d13e193b9f1d5fceb7) | ||
+ | |||
+ | ==== Flashing the Comtrend | ||
+ | |||
+ | The procedure is similar to the above one, requiring **the short-circuit trick**: | ||
+ | |||
+ | - Power-off the router, **open it removing the two screws** at the back and forcing the shell halves. | ||
+ | - **Short-circuit TX and RX** on the serial line and **power-on the router**. After about 3 seconds the power LED turn from green to **red**. You can remove the short-circuit. | ||
+ | - Connect the **Ethernet cable** and point your browser to **%%http:// | ||
+ | - Upload the **AR-5382u-CFE-A731-406TDE-C01_R01_0623.bin** file (it is the **[[wp> | ||
+ | - Wait about two minutes, untill the power LED becomes **green**, then **red** again (router rebooted). | ||
+ | - Point your browser again to **%%http:// | ||
+ | - Upload the **AR-5382u-A731-406CTL-T01_R08.bin** file. | ||
+ | - Wait about two minutes, untill the power LED becomes **green** steady again (router rebooted). | ||
+ | - Point your browser again to **%%http:// | ||
- | {{.: | ||
===== Web Resources ===== | ===== Web Resources ===== | ||
doc/appunti/hardware/alicegate_agpwi_wifi_n.txt · Last modified: 2018/11/18 21:17 by niccolo