Differences

This shows you the differences between two versions of the page.

--- doc:appunti:hardware:tanix_tx5 [2026/01/13 17:53] – [Specs] niccolo
+++ doc:appunti:hardware:tanix_tx5 [2026/01/13 19:07] (current) – [Ethernet Network DHCP client] niccolo
@@ Line 3: / Line 3: @@
 ===== Specs =====
-^ Android       |  |
+I applied a **factory reset** from the Recovery menu:
-^ Linux kernel  |  |
-^ RAM memory    |  |
+^ Android TV OS         | 14.0.0 API level 34  |
-^ NAND Storage  |  |
+^ Security patch level  | June 5, 2025  |
+^ Linux kernel          | 5.15.170  |
+^ CPU                   | ARMv8 |
+^ GPU                   | Mali-G31  |
+^ RAM memory            | 3.6 Gb  |
+^ NAND Storage          | 32 Gb  |
 ===== Ports and connectors =====
+===== Ethernet Network DHCP client  =====
+Once connected to an Ethernet network, the device attempts a DHCP configuration using the following **two MAC addresses**:
+^ MAC Prefix  ^ Vendor  ^
+^ 00:E0:4C    | Realtek Semiconductor Corp.  |
+^ 02:22:50    | No assignment                |
+The device attempts bot an **IPv4** configuration and a **ICMP6 neighbor solicitation**.
+===== Remote control =====
@@ Line 19: / Line 38: @@
 List of devices attached
 </code>
+===== Default Tanix account =====
+At first boot the device had an account configured on the **Tanix network**, which disappeared after a Recovery **Facoty reset**.
 ===== Kodi =====
+Factory installed **Kodi 18.5 Leia**,
 ===== Remote control microphone =====