rigacci.org

User Tools

Site Tools

Trace:
doc:appunti:hardware:raspberrypi_nas_remote_control

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Last revisionBoth sides next revision
doc:appunti:hardware:raspberrypi_nas_remote_control [2021/04/24 17:45] – [Configuring the gamepad in Kodi] niccolodoc:appunti:hardware:raspberrypi_nas_remote_control [2021/04/24 17:50] – [Web References] niccolo
Line 38: Line 38:
  
 The gamepad goes to stand-by after some time of non-use. To wake it up it is necessary to press the **start** button; the red LED turns on and the gamepad is working. The gamepad goes to stand-by after some time of non-use. To wake it up it is necessary to press the **start** button; the red LED turns on and the gamepad is working.
 +
 +==== Working kernel versions ====
 +
 +^ System                ^ Kernel             ^  ABS_X Working  ^
 +| Raspberry Pi 3        | 4.19.66-v7+        | Yes  |
 +| Raspberry Pi 4        | 5.10.11-v7l+       | No   |
 +| PC amd64 Debian 10.8  | 4.9.189-3+deb9u2   | Yes  |
 +| PC amd64 Debian 10.8  | 4.19.67-2+deb10u2  | Yes  |
 +| PC amd64 Debian 10.8  | 4.19.98-1+deb10u1  | No   |
 +| PC amd64 Debian 10.8  | 4.19.160-2         | No   |
  
 ===== Web References ===== ===== Web References =====
doc/appunti/hardware/raspberrypi_nas_remote_control.txt · Last modified: 2021/04/24 17:59 by niccolo