doc:appunti:hardware:raspberrypi_nas_remote_control
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revision | |||
doc:appunti:hardware:raspberrypi_nas_remote_control [2021/04/24 17:50] – [Web References] niccolo | doc:appunti:hardware:raspberrypi_nas_remote_control [2021/04/24 17:59] (current) – [Working kernel versions] niccolo | ||
---|---|---|---|
Line 38: | Line 38: | ||
The gamepad goes to stand-by after some time of non-use. To wake it up it is necessary to press the **start** button; the red LED turns on and the gamepad is working. | The gamepad goes to stand-by after some time of non-use. To wake it up it is necessary to press the **start** button; the red LED turns on and the gamepad is working. | ||
+ | |||
+ | ===== Problem: non working left and right arrows ===== | ||
+ | |||
+ | Everything is working correctly with a **Raspberry Pi 3**, using RaspiOS based on **Debian 9.11 Stretch** and **Kodi 17.6**. There is instead a problem with a **Raspberry Pi 4**, using RaspiOS based on **Debian 10.8** and **Kodi 18.7**: the **Left** and **Right** arrow keys do not work. | ||
+ | |||
+ | Someone had the same problem using Retropie: **[[https:// | ||
==== Working kernel versions ==== | ==== Working kernel versions ==== |
doc/appunti/hardware/raspberrypi_nas_remote_control.txt · Last modified: 2021/04/24 17:59 by niccolo