Differences

This shows you the differences between two versions of the page.

--- doc:appunti:hardware:raspberrypi_nas_networking [2021/04/02 13:18] – [Hard disk performance] niccolo
+++ doc:appunti:hardware:raspberrypi_nas_networking [2021/04/02 13:19] (current) – [Hard disk performance] niccolo
@@ Line 32: / Line 32: @@
 | USB 3.0    |  184.8 |
-If you are interested in transferring large files across the network, beware that a **100 Mbit LAN** imposes a limit of **14.7 Mb per second**, so the **USB 2** interface is enough to sustain that. But if you are interested into **Gbit Ethernet** performance offered by the Raspberry Pi 4, you definitely need to use the **USB 3.0** interface.
+If you are interested in transferring large files across the network, beware that a **100 Mbit LAN** imposes a limit of **14.7 Mb per second**, so the **USB 2** interface is enough to sustain that. But if you are interested into **Gigabit Ethernet** performance offered by the **Raspberry Pi 4**, you definitely need to use the **USB 3.0** interface.