Power Meter UPM PM300

User manual

MEASUREMENT

• Press A(UP) key to select Voltage , Amp, Max AMP Watt, Max Watt and Overload Display
• Press B(DOWN) key to select KWh, Total Cost and Price

SET PRICE

• Press B(DOWN) key to select Price display Mode
• Press D(PRICE SET) key to enter Price Setting Mode
• Use A(UP) or B(DOWN) key to adjust price and press D(PRICE SET) key to confirm

SET OVERLOAD WARNING

• Press A (UP) key to select Overload Display Mode
• Press C (Overload Set) key to enter Overload Setting Mode
• Press A(UP) or B(DOWN) key to select desired W or A
• Press C (Overload Set) key to enter to Value Setting Mode
• Use A(UP) or B(DOWN) to adjust to desired value of Over Load Watt or Amp and press C(OVERLOAD SET) key to confirm

CLEAR MAX LOAD

• Press and hold A (UP) & C(OVERLOAD SET) key for 3 seconds to clear the Max Load readings and buzzer beep

CLEAR USAGE READING

• Press and hold B (DOWN) & D(PRICE SET) key for 3 seconds to clear “usage time ” and “KWh” reading , buzzer beep