Differences

This shows you the differences between two versions of the page.

--- doc:appunti:hardware:hpmfp179fnw [2025/01/20 16:20] – [Scanning with GNU/Linux] niccolo
+++ doc:appunti:hardware:hpmfp179fnw [2025/01/21 15:53] (current) – [Printing exact size PDF] niccolo
@@ Line 32: / Line 32: @@
 <code>
 avahi-browse --all --resolve --terminate
+...
+=   lan0 IPv4 HP7C4D8F8963CC (HP Color Laser MFP 178 179)   Internet Printer     local
+   hostname = [HP7C4D8F8963CC.local]
+   address = [192.168.3.3]
+   port = [631]
 </code>
-In this case you can get also the IPP name that can be used instead of the IP address, something like
+The name HP7C4D8F8963CC can be resolved using **nmblookup** too:
 <code>
-hostname = [HP7C4D8F8963CC.local]
+nmblookup HP7C4D8F8963CC
+.168.3.3 HP7C4D8F8963CC<00>
 </code>
 So the URI used by CUPS can be **%%ipp://HP7C4D8F8963CC.local:631/ipp/print%%**, that will work also if you change IP addresses in your LAN.
+Here it is the PPD file generated by CUPS: **{{hp-color-laser-mfp-179fnw-ppd.zip|hp-color-laser-mfp-179fnw-ppd.zip}}**.
 ===== Unified Linux Driver =====
@@ Line 60: / Line 68: @@
 scanimage -L
 device `escl:https://192.168.3.3:443' is a HP C4D8F8963CC (HP Color Laser MFP 178 179) platen,adf scanner
+</code>
+All the supported options supported by the device can be discovered with:
+<code>
+scanimage --device-name 'escl:https://192.168.3.3:443' --all-options
 </code>
@@ Line 86: / Line 100: @@
 ===== Printing exact size PDF =====
-FIXME
+See **[[..:software:pdf_print_scale]]**.