doc:appunti:hardware:gl_mt300n_v2
This is an old revision of the document!
Table of Contents
GL-iNet MT-300N-V2
| GL.iNet Firmware | 2.264 |
|---|---|
| Kernel | 4.4.93 |
| OpenWrt | LEDE Reboot 17.01-SNAPSHOT |
| LuCI | git-17.298.45605-07e7ff0-1 |
| CPU | MediaTek MT7628AN ver:1 eco:2 - MIPS 24KEc V5.5 |
| RAM | 128 Mb |
| Total Flash Storage | 16 Mb |
| Free Flash Storage | 3.1 Mb |
Change repository
The default repositories are set in file /etc/opkg/distfeeds.conf, they are GL-iNet customized of OpenWRT:
src/gz lede_core http://www.gl-inet.com/lede/ramips/2.264/packages/mt7628 src/gz lede_base http://www.gl-inet.com/lede/ramips/2.264/packages/base src/gz lede_luci http://www.gl-inet.com/lede/ramips/2.264/packages/luci src/gz lede_packages http://www.gl-inet.com/lede/ramips/2.264/packages/packages src/gz lede_routing http://www.gl-inet.com/lede/ramips/2.264/packages/routing src/gz lede_telephony http://www.gl-inet.com/lede/ramips/2.264/packages/telephony src/gz lede_shadowsocks http://www.gl-inet.com/lede/ramips/2.264/packages/shadowsocks
As of September 2023 they are no longer in service, so we are unable to update or install new packages.
Installing a new package
opkg list-installed
opkg update opkg list
Starting OpenVPN
doc/appunti/hardware/gl_mt300n_v2.1694420888.txt.gz · Last modified: 2023/09/11 08:28 by niccolo