Differences

This shows you the differences between two versions of the page.

--- doc:appunti:hardware:gl_mt300n_v2 [2023/09/11 08:53] – [Installing a new package] niccolo
+++ doc:appunti:hardware:gl_mt300n_v2 [2023/09/11 10:39] (current) – niccolo
@@ Line 1: / Line 1: @@
-====== GL-iNet MT-300N-V2 ======
+====== GL-iNet GL-MT-300N-V2 Smart Router ======
 {{gl-mt300n-v2.png?direct&240|GL-MT300N-V2}}
@@ Line 66: / Line 66: @@
 /etc/init.d/openvpn start
 </code>
+The usual OpenVPN configuration files can be placed into the **/etc/openvpn/** directory. You can instruct OpenVPN to start the configuration by adding a section into **/etc/config/openvpn** (beware that the **hyphen** is allowd into OpenVPN configuration file, but it is **forbidden** into the OpenWRT name):
+<file>
+config openvpn 'my_openpvpn'
+        option enabled '1'
+        option config '/etc/openvpn/my-openvpn.conf'
+</file>
 If you want to be more sure that OpenVPN will start, enable it also into the GL-iNet custom configuration: