Differences

This shows you the differences between two versions of the page.

--- doc:appunti:hardware:blackview_bv5300 [2023/08/30 10:54] – niccolo
+++ doc:appunti:hardware:blackview_bv5300 [2024/06/03 16:25] – [Rooting] niccolo
@@ Line 1: / Line 1: @@
 ====== Blackview BV5300 Android Phone (rooting) ======
+I purchased this phone from Amazon in August 2023 for about **113 €**, to use as [[..:android:osmand_on_motorbike|GPS satellite navigation system on the motorbike]].
+{{.:bv5300:bv5300-back.jpg?direct&600|The Blackview BV5300}}
 ^ Model            | Blackview BV5300  |
+^ Size             | 161.5 x 77.6 x 15 mm, weight 280 g  |
 ^ RAM              | 4.0 Gb   |
 ^ CPU              | MediaTek Helio A22 (MT6761) - ARM Cortex-A53 2.0 GHz, 4 core  |
 ^ GPU              | PowerVR GE8300  |
 ^ Internal Memory  | 32 Gb    |
-^ Screen           | 6.1 inches, 720 x 1560, brightness ??? nit typical  |
+^ Screen           | 6.1 inches, 720 x 1560, brightness 500 cd/m² typical  |
 ^ Battery          | Non replaceable 6580 mA  |
 ^ Connector        | USB C    |
 ^ Android version  | 12       |
-^ A/B (Seamless) System Updates  | No  |
+^ A/B (Seamless) System Updates  | No\\ No //boot_a// or //boot_b// partitions\\ ''fastboot getvar current-slot'' returned //GetVar Variable Not found//  |
+^ Anti-Rollback Protection  | No\\ ''fastboot getvar anti'' returned //GetVar Variable Not found//  |
+{{.:bv5300:bv5300-front.jpg?direct&200|BV5300: Front view}}
+{{.:bv5300:bv5300-bottom.jpg?direct&200|BV5300: Bottom}}
+{{.:bv5300:bv5300-right.jpg?direct&200|BV5300: Rigth buttons}}
+{{.:bv5300:bv5300-left.jpg?direct&200|BV5300: Left button}}
 ===== Getting the scatter file =====
@@ Line 28: / Line 39: @@
   * Using **SP_Flash_Tool_v5.2228_Linux**:
-    * Run **flash_tool.sh** and click on **Readback**.
+    * Run **flash_tool.sh**
+    * In the **Download** tab, **Scatter-loading File**: choose any scatter file you have on your hard disk (this step is required to unlock the Readback function below).
+    * Click on the **Readback** tab and delete all the partitions defined by the scatter file you loaded.
     * Add **two regions** to be read-back:
       * Filename: **preloader.bin**
@@ Line 57: / Line 70: @@
 ===== Rooting =====
-If your phone has the build number **BV5300_EEA_TE105_V1.0_20230705V11**, you can download the following archive containing the already patched **boot.img** and **vbmeta.img** images. Obviously you must trust me that the images don't contain malware or alike. If you don't trust me, you have to execute all the steps by yourself: **{{.:bv5300:bv5300_eea_te105_v1.0_20230705v11_magisk-26.1-boot.zip|BV5300_EEA_TE105_V1.0_20230705V11_magisk-26.1-boot.zip}}**.
+If your phone has the build number **BV5300_EEA_TE105_V1.0_20230705V11**, you can download the following archive containing the already patched **boot.img** and **vbmeta.img** images. Obviously you must trust me that the images don't contain malware or alike: **{{.:bv5300:bv5300_eea_te105_v1.0_20230705v11_magisk-26.1-boot.zip|BV5300_EEA_TE105_V1.0_20230705V11_magisk-26.1-boot.zip}}**.
+If you don't trust me, you have to execute all the steps by yourself.
 Whith the files contained into that archive you can directly jump to the last step of this guide: [[#flash_the_bootimg_and_the_vbmetaimg_custom_images|Flash the boot.img and the vbmeta.img custom images]].